E-Liner Universal F

The positioning of test system unit E-Liner Universal F is designed as universal test system​

 

Features

The deep-seated universal test system E-Liner Universal F can be equipped with different systems for the following test types:

• Pedestrian protection lower and upper legform tests, Flex PLI GTR tests
• Ejection Mitigation tests
• Bodyblock tests

In comparison to our positioning rig E-Liner Universal M, it is characterised by its rotating tower and the longer traverse path. The positioning accuracy of all traverse paths, rotating and turn directions is +/- 0,1 mm.

The positiong movements are effected with a wireless touchscreen control panel.

Our electrically driven acceleration units E-Liner PED LEG and E-Liner EMIT are laid out as modules which can be inserted into the positioning unit according to requirements. It takes only 20 minutes to change the modules because they are fixed to the positioning unit with only 8 screws.

The E-Liner PED LEG acceleration unit can be equipped with a bodyblock impactor mounting unit.

The positioning unit and the system control can both be completed later on.

The system control includes features such as storage of 10 target points, automatical detection of the stored target points and the automated returning of the positioning unit before test start after target detection

​

Positioning Unit
Power	Electrically driven, 400 V, 63 A
Drive	Electrically driven trapezoidal spindles
Dimensions (W/H/D) (can be adjusted acc. to customer’s specifications)	appr. 5400/3350/3850 mm
Traverse paths (x/y/z – vehicle coordinate system)	appr. 1500/3000/1100 mm
Stepless z-rotation	+45° to -45°
Stepless y-rotation	+20° to -30°
E-Liner PED LEG Module
E-Liner PED LEG Module	Launcher for the performance of pedestrian protection legform tests and sensor tests.
Additional Options for the PED LEG Module
Bodyblock	Implementation of a Bodyblock mounting unit.
Guided Headform	Adaptation for the ECE-R12 guided impactor.
Pendulum	Adaptation for tests with the pendulum impactor
Ejection Mitigation Module
E-Liner EMIT Module	Module for the performance of Ejection Mitigation tests.
System Control
Hard- and Software	Siemens
Operating interface	Clearly layouted, simple to use

​